Getting ready early in the winter mornings can be very stressful. If you are in the middle of the winter and suddenly your car heater stops working, then it would make you feel miserable. Due to this the inside of your car would feel like an ice box and broken heater would also not allow your defroster to blow warm air to your car windshield and then ice and fog would not be eliminated, which would cause a hazard while you are driving.
Here are some causes of a car heater breakdown
There are a number of reasons due to which a car heater can stop working. They are as follows:
- A low water level or antifreeze due to a leak in the car cooling system.
- A blower fan that may not be working properly.
- May be the engine is not working up properly due to a bad thermostat.
- Presence of some rust particles in the coolant which has blocked the heater core and thus no air is being circulated into the cabin properly.
As you have now seen that there can be various problems and due to that you may require different types of repairs. The car heater is a combination of various things which provides heat into the vehicle. The most important component of a car heater is its heater core which acts like a small radiator and passes the hot air under the dashboard into your car. If you want to replace, then it may cost you several hundred dollars.
A heater core is a part that is placed on a workbench and the car is built around it. You must know this thing that if you want to replace a heater core, it may take more than a day to repair it.
The heating system works with the same coolant that is circulated throughout the engine. Here is the procedure with the help of which you will be able to change your antifreeze:
- Getting started
The first thing which you have to do is to unscrew the radiator and make sure that you wear your safety goggles. Take the antifreeze tester and then insert the tubing into the radiator. It is really important to change the antifreeze periodically or else it would turn acidic.
- Starting the freshwater to flush
If you want to get rid of all the accumulated sediments and rust, then nothing would work better than the freshwater flush. You should always keep your child as well as pet away from this and don’t forget to recycle the old antifreeze.
- Install the T- fitting
Take a knife and try to cut the inlet hose. Use the hose clamps to insert the T-fitting into the hose. Then the next step is to take the radiator adapter and attach hose at one end and the other to its radiator. Next step is to screw your garden hose and turn it on. Now the water and antifreeze would start draining into the pan. Drain the water from the petcock valve.
- Replace the thermostat
The main motive of the thermostat is to make sure that your car engine doesn’t overheat. Remove the housing of the thermostat and then unscrew the thermostat assembly. Now take a new one and carefully put it back into the socket.
- Replace the antifreeze
Mostly all the cars require 50/50 mix water and antifreeze. You can always refer to your owner’s manual to check the amount of antifreeze which you need to put in. Fill in the radiator and reservoir with antifreeze and then you can fill it to the top by adding water. Replace the pressure cap and then you are done.
If you are willing to change your car parts all by yourself and want to buy new ones, then all you have to do is to visit our online auto parts store – https://partsavatar.ca/. We care for our customers and that’s why we offer the best quality of products at affordable prices.